Floeter AirWave 1 - Change the Counter pressure block; Counter pressure block replacement steps

OPERATING INSTRUCTIONS
13
Change the knife
You can easily change the knife for AirWave1 yourself.
Step 1: Switch off the machine and disconnect power
Always switch off the machine before opening it.
Disconnect power to the machine by removing
the power cord completely from the machine.
Allow the machine to cool down!
Only then open the machine casing on the right
side.
-unscrew the screws with provided hex key
-hold cover at the bottom and remove cover with
a little tilting movement.
You must follow this step. It is for your safety.