Floeter AirWave 1 - Support and Service; Support and service contact information

OPERATING INSTRUCTIONS
20
Film guide pins
For a more effective air volume or better film guide for the film Types 8.3 - 8.5 use the two
guiding pins.
Screw the pins at the machine casing
Thread the film trough the pins and over the
airpipe.
Start production.
Error codes
The AirWave1 has an integrated diagnostic program. In the event of an error, an “E”
code will appear on the display. This code will help you correct the error:
- „Foil Empty“: film roll empty.
- „Check Foil“: refeed film on to the airpipe
- „Heat Error“: please contact our Floeter Service if this Error will occurs repeatedly
or if it would not be possible to quit.