FLORABEST 79822 - Connecting the Appliance

9
FBC 7 A1
GB
IE
Connecting the appliance
IMPORTANT
This Programmable Water Timer may only be connected to a
drinking water outlet fi tted with a safety device that corresponds
to at least TYPE HD as per EN 1717 (non-return valve with
pipe ventilation).
► Appropriate adapters are commercially available.
NOTICE
► The appliance is equipped with a coupling nut
6
for water
taps with a 33.3 mm thread (G1"). The adapter
11
is used to
connect the appliance to water taps with a 26.5 mm thread
(G ³/₄"). Should leaks/spills be encountered when using the
adapter
11
, it is recommended that you wrap the thread of
the tap with Tefl on sealing tape.
♦ For a 26,5 mm thread (G ³⁄₄"): Screw the adapter
11
onto the
water tap.
♦ Screw the coupling nut
6
onto the thread of the water tap
resp. the adapter.
♦ Screw the coupling unit
12
onto the hose connection. You can
the connect a hose to the coupling unit.
♦ Open the water tap.
IB_79822_FBC7A1_LB3.indb 9IB_79822_FBC7A1_LB3.indb 9 14.12.12 13:5114.12.12 13:51