FLORABEST 79822 - Stopping the Watering; Setting the Summer Time; Rain Sensor

17
FBC 7 A1
GB
IE
Stopping the watering
♦ During watering, press the ON/OFF
5
button to stop the
watering.
Setting the Summer Time
♦ While the appliance is in standby mode, press and hold the
button
4
for at least 2 seconds. In the display appears
Summer and the time is advanced by 1 hour.
♦ Press and hold the button
4
again for 2 seconds to
deactivate Summer Time.
Rain sensor
Before each watering, the signal from the optional rain sensor is
queried:
LOW: Watering is carried out as scheduled.
HIGH: Watering is not carried out. The rain sensor symbol
F
blinks
for one minute.
IMPORTANT
►
A jumper
7
is inserted in the terminals
8
on delivery. It must
always be inserted if you are not connecting a rain sensor,
otherwise the programmed watering cannot take place.
► If the jumper is lost, you can bend a new jumper into shape
using standard commercial wire or a paperclip.
IB_79822_FBC7A1_LB3.indb 17IB_79822_FBC7A1_LB3.indb 17 14.12.12 13:5114.12.12 13:51