To Next PageTo Next PageWhat to do if FLORABEST FBM 135 A1 Lawn Mower engine starts but does not run at full power?
If your FLORABEST Lawn Mower engine starts but doesn't run at full power, it could be due to a dirty air filter; replace it. Alternatively, the carburetor mix might be incorrectly adjusted, requiring adjustment by a specialist workshop.
What to do if FLORABEST FBM 135 A1 engine overheats?
If the engine overheats, it could be due to blocked ventilation holes; clean the ventilation slots. It might also be caused by an incorrect spark plug, so change the spark plug. Another possible cause is too little engine oil, so fill it with engine oil.
Why FLORABEST Lawn Mower engine smokes?
If your engine smokes, the cause might be a dirty air filter, so you should replace it. Another possible reason is too little engine oil in the engine; in that case, fill it with engine oil.
What to do if FLORABEST Lawn Mower engine splutters and stops?
If the engine splutters and stops, it could be due to an incorrectly adjusted carburetor mix, which requires adjustment by a specialist workshop. Another cause might be a sooted spark plug, so clean, adjust, or replace the spark plugs.
Why FLORABEST FBM 135 A1 engine starts but equipment does not run at full power?
If the engine starts but the equipment doesn't run at full power, it might be due to a dirty air filter, so replace the air filter.
What to do if FLORABEST Lawn Mower blade does not turn?
If the blade doesn't turn, it could be blocked with grass, so remove the grass. Alternatively, the blade might not be installed correctly, so have it installed by a specialist workshop.
What to do if FLORABEST Lawn Mower starts but doesn't run at full power?
If your lawn mower starts but doesn't run at full power, the air filter might be dirty. Replace the air filter, referring to the cleaning and maintenance instructions.
What to do if the blade does not turn on my FLORABEST FBM 135 A1?
If the blade of your FLORABEST Lawn Mower does not turn, it might be blocked with grass, so remove the grass. Alternatively, the blade may not be installed correctly, in which case you should have it installed by a specialist workshop.
Why is the output unsatisfactory or engine labouring on my FLORABEST FBM 135 A1 Lawn Mower?
If the output of your FLORABEST Lawn Mower is unsatisfactory or the engine is labouring, the grass might be too short or too long; adjust the cutting height accordingly. A blunt blade can also cause this issue, so have it sharpened or replaced by a specialist. Additionally, check if the blade is blocked with grass, the grass collection box is full, or the ejection channel is blocked, and remove any obstructions.
Why my FLORABEST Lawn Mower engine does not start?
If the FLORABEST Lawn Mower engine doesn't start, it might be due to several reasons. First, ensure there's enough petrol in the tank; if not, fill it up. Another reason could be an incorrect starting sequence, so double-check the engine starting instructions. Also, verify that the spark plug connector is correctly attached and that the spark plug isn't sooted; clean, adjust, or replace it if needed. Finally, an incorrectly adjusted carburetor mix could be the culprit, which would require adjustment by a specialist workshop.
General| Brand | FLORABEST |
|---|---|
| Model | FBM 135 A1 |
| Category | Lawn Mower |
| Language | English |
Outlines fundamental safety procedures and warnings for using the equipment.
Details actions to take before operating the lawnmower, including clothing and fuel safety.
Provides guidelines for safely operating the lawnmower, including starting, stopping, and slope usage.
Guides on how to properly fill the engine with oil and petrol.
Provides step-by-step instructions for starting and stopping the engine.
Explains how to operate the mower for effective and safe mowing.
Step-by-step guide for draining and refilling the engine oil.
Guidance on inspecting, sharpening, or replacing the cutting blade.
Provides a guide to diagnosing and resolving common issues with the lawnmower.
