Why does my FLORABEST Lawn Mower engine over-heats?
If your FLORABEST Lawn Mower engine is overheating, it might be due to a few reasons. Check if the ventilation slot is blocked and clean it if necessary. Another possible cause is using the incorrect spark plug, which would require a replacement. Also, ensure there is enough engine oil; if it's too low, fill it to the recommended level.
What to do if my FLORABEST Lawn Mower output is unsatisfactory?
If your FLORABEST Lawn Mower's output is unsatisfactory or the engine is laboring, consider these points: the grass might be too short or too long, so adjust the cutting height accordingly. Also, check if the blade is blocked with grass, the grass collection box is full, or the ejection channel is blocked; remove the grass in such cases.
Why FLORABEST Lawn Mower starts but does not run at full power?
If your FLORABEST Lawn Mower starts but doesn't run at full power, a dirty air filter could be the cause. Replace the air filter. Also, make sure the throttle is in the correct position.
What to do if FLORABEST Lawn Mower engine does not start?
If your FLORABEST Lawn Mower engine isn't starting, check if the spark plug connector is correctly attached. If not, attach it properly. Also, the spark plug might be sooted, requiring cleaning, adjustment, or replacement.
Why does my FLORABEST Lawn Mower engine splutter and stop?
If your FLORABEST Lawn Mower engine splutters and stops, it could be due to a sooted spark plug. Clean, adjust, or replace the spark plugs.
What if blade does not turn on FLORABEST Lawn Mower?
If the blade of your FLORABEST Lawn Mower does not turn, it might be blocked with grass. Remove the grass.
Why FLORABEST Lawn Mower engine does not start?
If your FLORABEST Lawn Mower engine won't start, it could be due to several reasons. First, ensure there is enough petrol in the tank; if not, fill it up. Another reason may be an incorrect starting sequence, so make sure you are following the correct procedure. Also, check the spark plug connector to ensure it's correctly attached and that the spark plug isn't sooted; clean, adjust, or replace it if necessary. Finally, the carburetor mix might be incorrectly adjusted, in which case you should have it adjusted by a specialist workshop.
What to do if FLORABEST Lawn Mower engine splutters and stops?
If your FLORABEST Lawn Mower engine sputters and stops, it could be due to an incorrectly adjusted carburetor mix, which should be adjusted by a specialist workshop. Another possible cause is a sooted spark plug, which should be cleaned, adjusted, or replaced.
What to do if FLORABEST Lawn Mower blade does not turn?
If the blade of your FLORABEST Lawn Mower does not turn, it might be blocked with grass; remove the grass. Alternatively, the blade may not be installed correctly, and you should have it installed by a specialist workshop.
How to fix abnormal noises from FLORABEST Lawn Mower?
If your FLORABEST Lawn Mower is making abnormal noises, rattling, or vibrating, the blade may not be installed correctly. Have the blade installed by a specialist workshop.
General| Power | 1900 W |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cutting Height Adjustment (Approx.) | 20-70 mm |
| Cutting Height Adjustment | 6-stage central |
Explains symbols shown on the lawnmower itself.
Illustrates symbols found on the handle of the lawnmower.
Shows symbols related to fuel and oil filler caps.
Displays symbols associated with the oil filler cap.
Depicts symbols indicating throttle positions (fast/slow).
Illustrates symbols found on the fuel tank area.
Explains instructional symbols used within the manual for guidance.
Details essential steps to take before operating the lawnmower for safety.
Provides crucial guidelines for safe operation and maneuvering of the equipment.
Outlines essential procedures for maintaining and storing the lawnmower.
Lists the main components of the lawnmower with corresponding numbers for identification.
Explains the core operational features and capabilities of the lawnmower.
Details the function and operation of the safety catch mechanism for stopping the engine.
Explains the protective features against flung-out parts during mowing.
Describes the purpose of the exhaust guard for preventing contact with hot surfaces.
Lists all items included in the product packaging for user verification.
Step-by-step guide for assembling the handle bar securely.
Instructions for attaching the drinks holder accessory to the mower.
Guidance on correctly installing and securing the starter cord.
Instructions for fitting the grass collection box for grass clippings.
Step-by-step guide for starting and stopping the engine safely.
Instructions for operating the lawnmower for mowing lawns.
Provides general advice for efficient and safe mowing practices.
Instructions on how to safely tip the mower for cleaning the underside.
Step-by-step guide to replacing the air filter for engine performance.
Information on checking and maintaining the spark plug for optimal engine function.
Key advice for storing the equipment correctly to prevent damage.
A detailed table specifying maintenance tasks and their recommended frequency.
To Next Page
