To Next Page
M
moorejohnJul 31, 2025
Why is my FLORABEST FRM 1200 A1 result unsatisfactory?
- SShaun RochaJul 31, 2025
If you find the results from your FLORABEST Lawn Mower unsatisfactory or the motor labors, it could be due to several reasons. The cut height might be too low, so try setting a higher cut height. The blade ( H 18) might be blunt, so have it sharpened or replaced. The blade area could be blocked, so clean the equipment. Finally, the blade might be assembled incorrectly, so ensure it is installed correctly.
General
