8
If you have correctly adjusted the
fit of your Flow Frames the back
faces should now be lined up to
create a flat ‘window’ into the
hive. The frames should fit snugly
with little movement front-to-
back or side-to-side and there
should be no gaps greater than
3mm (
1
/
8
”).
Adjust
screw
for
snug
fit
The back
of the
frame sits
on this
ledge
Frame
should
push firmly
against
inside of
box
FRONTBACK
Adjustment
screw
Ensure any gaps are
less than 3mm
*SIDE OF SUPER - CUTAWAY
Spacer -
for extra
adjustment
l
! WARNING: Before adding the Flow Super to your hive make sure
there are no gaps >3mm.
To Next Page
Loading...
