77www.owair.com
POLSKIENGLISHРУССКИЙNEDERLANDS
The correction of sensor measurements is also possible.
Antifreeze Leading sensor
Automatic protection against too low temperature in
the room. When temperature in the room drops below
desired temperature, LEO and KM units are turned on:
• valves (if installed) opens,
• fan is turned on at 100% of eciency,
• KM dampers are closed, unit operates using recirculating air.
Units operate until the temperature in the roomis higher
of 1
o
C than antifreeze temperature, protecting the hall
against too low temperature inside and freeze of heating
medium in the exchanger.
active temperature sensor
leading sensor is the sensor built
in T-box controller
leading sensor is the local sensor. When it is
selected, operation of each unit is regulated
locally
Temperature sensor
To Next Page
Loading...
Need help?
General