78 79www.owair.com
External gas detector
The SYSTEM enables cooperation with an external CO
2
sensor, humidity sensor, etc. - two-stage alarm signal.
The OXeN, KM and Cube capacity setpoint and the KM
and Cube damper opening will be changed automatical-
ly depending on the alarm signal.
The central unit must be connected to one DRV OXeN,
DRV KM control module or a controller in the Cube
device.
In the menu, indicate to which device the central unit is
connected.
In the example given, the control unit has been connect-
ed to DRV KM No. 7.
Controller lock
To activate the lock:
1. Set password
2. Conrm OK
Free 4-digit password can be set.
After returning to main screen and 30 s of inactivity,
controller will be locked automatically.
Gas detector
Controller lock
To Next Page
Loading...