109www.owair.com
POLSKIENGLISHРУССКИЙNEDERLANDS
Fan heater operates always according to temperature set
on the controller, regardless K1/K2 mode.
air curtain operates according to door sensor and
thermostat, whose priority is equivalent
heating – valve is opened when measured
temperature is lower than desired temperature
ventilation – valve is constantly closed, fan
operates continuously at selected step
air curtain operates according to door sensor and
thermostat. Door sensor has a priority. Without
it’s signal unit will not run
active operating mode
Operating modes
Air ow setting
air ow setting
After the disappearance of signal from the door
sensor (or thermostat if K1 mode is activated), fan
of air curtain can operate on selected step for a
specied period of time or be turned o - select
OFF.
AirowOperating mode
To Next Page
Loading...