Flowserve Limitorque MX Device Net Field Unit - Default Chapter; Table of Contents

3
Limitorque MX DeviceNet Field Unit FCD LMENIM2328-00 – 11/05
flowserve.com
Contents
Declaration of DeviceNet Conformance – ODVA Certification 5
Abbreviations
6
1 Introduction
7
1.1 Purpose
7
1.2 How to Use this Manual
7
1.3 User Safety
7
1.4 User Knowledge
8
1.5 DeviceNet System Capabilities and Features
8
1.5.1 General Specifications
8
2 System Components 1
0
2.1 Introduction 1
0
2.2 Hardware 1
0
2.2.1 Limitorque MX 1
0
2.2.2 DeviceNet Field Unit 1
1
2.2.3 Hardware interface 1
2
2.2.4 Network Cable 1
2
3 Installation and Configuration 1
3
3.1 Site and Network Cable Preparation 1
3
3.1.1 Site Preparation 1
3
3.1.2 Network Cable Preparation 1
3
3.2 Installation Verification 1
6
3.2.1 Network Cabling Installation Verification 1
6
3.2.2 DNFU Installation Verification 1
7
4 Object Model Diagram 1
7
4.1 Assembly Objects 1
8
4.2 Output Assembly Instances 1
8
4.2.1 DI_Position_and_Bus_Mode_Chan 2
2
4.2.2 DI_Position_Chan 2
2
4.2.3 DI_Actuator_Faults_1_Chan 2
2
4.2.4 DI_Actuator_Faults_2_Chan 2
3
4.2.5 DI_Actuator_Alarms_Chan 2
3
4.2.6 DI_Disc_User_Input_Chan 2
4
4.2.7 DI_Read_Disc_Output_Chan 2
4
4.2.8 DO_Position_Chan 2
4
4.2.9 DO_ESD_Chan (Read Only) 2
4
4.2.10 DO_Relay_Chan 2
5
4.2.11 DO_Actuator_Faults_3_Chan 2
5
4.2.12 Ctrl_Status_Chan 2
5
4.2.13 DI_Alarms_2_Chan 2
5
4.2.14 DI_Actuator_Faults_3_Chan 2
5
4.3 Channel Interface 2
6
4.4 Transducer Block Object 2
8
4.4.1 MAC ID 3
0
4.4.2 Baud Rate 3
1
4.5 Network Management 3
1
4.5.1 Offline Connection Set 3
1
4.5.2 Device Heartbeat Message 3
1