Limitorque MX DeviceNet Field Unit FCD LMENIM2328-00 – 11/05
40
Do not touch the surface of the printed circuit board, the connectors, or the components with conduc-
tive devices or with your hands.
Always place the component or board into an anti-static protective bag for transportation or storage.
Transport all static-sensitive components only in static-shielding carriers or packages. Place static
awareness labels on all components to prevent removal from static-shielding container during transit.
Handle all static-sensitive components at a static-safe work area including floor mat, wrist strap, air
ionizer, ground cord, and conductive table mat.
Do not subject components to sliding movements over any surface, at any time.
8 How to Order Parts
To order parts or obtain further information about your Limitorque DeviceNet field unit, contact your
local Limitorque distributor sales office, or:
Flowserve Corporation Flow Control Division
Limitorque Actuation Systems
5114 Woodall Road
P.O. Box 11318 Lynchburg, VA 24506-1318
Phone (434) 528-4400
Fax (434) 845-9736
To find the Limitorque distributor or sales office near you, go to http://www.limitorque.com
All inquiries or orders must be accompanied by the following information supplied on the actuator
nameplate:
Unit size
Order number
Serial number
9 Regulatory Information
The Flowserve Limitorque DeviceNet board has been tested in accordance with the listed specifications
and complies with European Directive 89/336 EEC, EMC Directive and 73/23 EEC, Low Voltage Directive;
EN 55011:1998 + A2:2001
EN 61000-6-2:2001
•
•
•
•
•
•
•
•
To Next Page
Loading...