Need help?Do you have a question about the Fluance Ai41 and is the answer not in the manual?
General| SPEAKER CONFIGURATION | 2 Way – 2 Driver Bookshelf Speaker System with Integrated Amplifier |
|---|---|
| TWEETER | 1 inch Silk Soft Dome Ferrofluid Cooled |
| WOOFER | 5 inch Woven, Glass Fiber Composite Drivers with Butyl Rubber Surrounds |
| FREQUENCY RESPONSE | 35Hz – 20KHz (DSP Virtual Sound) |
| CROSSOVER FREQUENCY | 2800Hz Phase Coherent 12dB/Oct – PCB Mounted Circuitry |
| TOTAL HARMONIC DISTORTION (THD) | <0.3% (THD+N 1%) |
| BLUETOOTH | Yes; BT 5.0 |
| INPUTS | RCA, Bluetooth, & Optical |
| AMPLIFIER POWER | Class D 90 Watts Continuous Average Output (2x 45 watts) |
| POWER | Input: 100-240V 50Hz/60Hz |
Weight and Dimensions| SPEAKER WEIGHT | Active Speaker: 8.52 lbs (3.86 kg) Passive Speaker: 7.44 lbs (3.37 kg) |
|---|---|
| DIMENSIONS (HxWxD) | 10.9 x 6.5 x 7.6 inches 27.7 x 16.5 x 19.3 cm |
Explains the recommended break-in process for optimal sound reproduction.
Provides links to videos for setup and configuration.
Lists the active and passive speakers, remote, cables, and batteries.
Includes quick start guide, lifetime support, and 2-year warranty.
Describes the front panel controls: control knob, source LED, and IR sensor.
Details back panel connections: Bluetooth reset, optical, RCA, subwoofer, speaker outputs, DC input, power switch.
Identifies the speaker input terminal on the passive speaker.
Explains the functions of each button on the remote control.
Guides on positioning the active and passive speakers for optimal audio.
Instructions on connecting the passive speaker to the active speaker using wire.
Details connecting the power adapter and turning on the unit.
Explains how to turn the speakers on and off using the control knob or remote.
Describes how to cycle through audio inputs using the control knob or remote.
Explains the LED colors corresponding to each audio source.
Instructions for connecting source devices via RCA cable.
How to select the RCA input and adjust volume.
Important note about using a phono preamplifier with turntables.
Steps to pair a Bluetooth device with the Ai41 speakers.
Using the remote to control Bluetooth playback and volume.
Steps to reset Bluetooth pairing if connection fails.
Instructions for connecting source devices via optical cable.
How to select the optical input and adjust volume.
Notes on Dolby Digital, DTS, PCM, Stereo, and External Speakers settings.
Instructions for connecting a powered subwoofer to the Ai41 speakers.
Information about the subwoofer cable not being included.
How to increase or decrease the speaker volume.
How to adjust bass and treble levels using the remote.
Explains LED behavior when setting bass/treble.
How to cycle through LED brightness levels (100%, 25%, OFF).
Covers auto-pairing, connecting new devices, and connection range.
Addresses RCA compatibility, turntable volume, and input volume differences.
Discusses the break-in period and general performance questions.
Solutions for when the speakers do not power on.
Troubleshooting steps for when no sound is produced.
Specific steps for no sound from the passive speaker.
Tips for resolving poor audio quality or incorrect connections.
Solutions for unwanted hissing noise from the speakers.
Details the speaker design, drivers, and Bluetooth version.
Lists supported inputs and the amplifier's power output.
Provides technical data on frequency response and harmonic distortion.
Information on power input, speaker weight, and physical dimensions.
Details FCC compliance, interference guidelines, and safety precautions.
States compliance with Industry Canada license-exempt RSS standards.
Explains the warranty terms and period for Fluance products.
Lists specific warranty durations for different product types.
Lists conditions and damages not covered by the warranty.
Steps to follow for obtaining warranty service and required documentation.
To Next Page
