Fluance RT81P - Page 17

Fluance RT80/RT81/RT81P User Manual
17
Low Volume
• Check the RCA connections are correct and fully inserted.
• Ensure that the Preamp Switch is set to the LINE position if not using an external
preamp.
• Iflowvolumepersistsmoreinformationisavailableat:www.uance.com/support
Audio From Only One Channel
• Test the speakers with another device such as a CD Player or Smartphone.
• Conrmthetonearmisbalancedandusingthecorrecttrackingforce.
• Disconnect and reconnect the RCA cables ensuring they are fully inserted.
• Try a different set of RCA cables.
• Remove the headshell from the tonearm and use rubbing alcohol on a cotton swab to
clean the contacts on the back of the headshell. Reinstall the headshell ensuring the
locking nut is tightened completely.
Static: Pops/Crackles
• An anti-static brush can be used before playback to remove static charge from your
records. There are also anti-static guns available to remove static without touching
the record.
• Static builds up easier in dry or low humidity environments. Increasing the humidity
can help decrease static buildup.
• Ifstaticisnotresolved,itmayhelptocleantheturntablewithamicrobercloth
slightly dampened with distilled water.
Need Additional Help?
• Do not return this product to the store.
• PleasecontactaFluanceCustomerSupportRepresentativerst,regardingany
additionalinformationonproductfeatures,specicationsorassistancewithsetup.
• Online web chat or Support: www.uance.com/support