Fluance RT81P - Page 18

Fluance RT80/RT81/RT81P User Manual
18
Specifications
Specications RT80 RT81 RT81P
Cabinet Specications
Material MDF MDF MDF
Dust Cover Yes - Tinted Yes - Tinted Yes - Tinted
Turntable Specications
Drive System Belt Drive Belt Drive Belt Drive
Motor DC Motor DC Motor DC Motor
Speed 33 1/3 RPM, 45 RPM 33 1/3 RPM, 45 RPM 33 1/3 RPM, 45 RPM
Wow and Flutter 0.2% 0.2% 0.2%
Signal-to-Noise Ratio
(Weighted)
67dB or higher (A-weighted, 20kHz LPF)
Signtal-to-Noise Ratio
(Unweighted)
60dB or higher (A-weighted, 20kHz LPF)
Speed Variation +/-1.00% +/-1.00% +/-1.00%
Platter Aluminum Aluminum Dampened Aluminum
Diameter of Platter 12", 30cm 12", 30 12", 30cm
Weight of Platter 1.25lbs (566g)
Auto-Stop Yes Yes Yes
Turntable Mat Felt Rubber Acrylic
Tonearm Specications
Typ e Static Balanced, S-Type Static Balanced, S-Type Static Balanced, S-Type
Supported Cartridge
Weight
0.12 to 0.23oz (3.5 to 6.5g)
Anti-skating Adjustment Yes Yes Yes
Pivot Bearing Yes Yes Yes
Material Aluminum Aluminum Aluminum
Effective Tonearm
Length
8.82in (224mm)
Effective Tonearm Mass
Overhang
0.76in (19.2mm)
Headshell Mount H-4 Bayonet Mount H-4 Bayonet Mount H-4 Bayonet Mount
Tonearm Height 0.67in (17mm)
Tonearm Wire
36 AWG Litz Cable / 7
Strand
36 AWG Litz Cable / 7
Strand
36 AWG Litz Cable / 7
Strand
Cartridge Specications
Typ e
Dual Moving Magnet
(MM)
Dual Moving Magnet
(MM)
Dual Moving Magnet
(MM)
Cartridge Model Audio Technica: AT91 Audio Technica: AT95E
Audio Technica: AT-
VM95E
Replacement Stylus ATN 91 ATN 95E AT-VM 9 5E
Stylus
0.6mil Bonded
Conical (Diamond)
0.4x0.7mil Bonded
Elliptical (Diamond)
0.3 x0.7mil Bonded
Elliptical (Diamond)