INST 385 E35 SALT CHLORINE GENERATOR (10-2018)
MAINTENANCE OF YOUR SALT CHLORINE GENERATOR
Maintenance Schedule: Your new product incorporates moving parts and withstands high velocity water with
chemicals in it. Some of these parts will wear in the normal course of use and require regular checks and
maintenance. Performing these checks and maintenance will identify parts that have worn and require
repair/replacement before further serious damage is sustained. A small amount of regular care and attention to
your
pool equipment will help ensure long life and trouble-free performance.
To protect against extremes of temperature, your unit is vented to allow expensive electronics to cool. Ants and
some
insects are often attracted to the warmer, dry environment inside the enclosure. We recommend that,
with power
turned off, you spray a surface insecticide on the surfaces surrounding the control to prevent ant and
insect ingress.
Repeat every three months or as necessary.
Service action (if required)
Check cell for calcium build up
Check water chemistry
Check cable connections to cell
If required, soak electrode in cell cleaning
solution. Use a soft brush.
Balance pH in pool and adjust output of
unit
to ensure satisfactory production of
chlorine.
Ensure no water contact is occurring with
pins.
Check cell connections for leaks
Check for insects/ ants
Isolate Pump, turn power off, clean and
grease O-rings or replace if necessary.
Spray a surface insecticide on the
surfaces
around the unit to prevent
ant and insect
ingress.
Important note: Regular maintenance is important to ensure long life and trouble-free performance of your pool
equipment.
If unable to perform the maintenance yourself, contact your local AstralPool office who will arrange a
trained service technician to perform the maintenance for you.
Record your Equipment details here for quick reference:
To Next Page
Loading...