Fluke 115 Specifications

Technical Data
Fluke 115
Multimeter
Features include:
•
Resistance, continuity, frequency, capacitance, and diode test
•
Measures 20 A (30 seconds momentary; 10 A continuous)
•
Large white LED backlight to work in poorly lit areas
•
Compact ergonomic design for one-handed operation
•
Compatible with optional magnetic hanger (ToolPak
™
)
•
True-rms for accurate measurements on non-linear loads
•
Min/Max/Average with elapsed time to record signal
fluctuations
•
CAT III 600 V safety rated
Compact true-rms meter for
field service technicians
The Fluke 115 is the solution for a wide
variety of electrical and electronic test-
ing applications. This true-rms meter
provides easy one-handed operation in
a compact package.
General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at
0 % to 95 %.
The accuracy specifications take the form of:
± ( [ % of reading ] + [ counts ] )
Maximum voltage between any
terminal and earth ground
600 V
Surge protection 6 kV peak per IEC 61010-1 600 V
CAT III, Pollution Degree 2
Fuse for A input 11 A, 1000 V FAST Fuse
(Fluke PN 803293)
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Operating temperature -10 °C to + 50 °C
Storage temperature -40 °C to + 60 °C
Battery 9 volt Alkaline, NEDA 1604A/
IEC 6LR61
Battery life 400 hours typical, without backlight
N10140
R
Actual size

Fluke 115 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Frequency range	5 - 50 kHz
AC voltage range	3 - 4000 V
DC voltage range	6000 - 0.001 V
Resolution (DC voltage)	0.1 mV
Dimensions (WxDxH)	167 x 84 x 46 mm
Battery voltage	9 V

Weight and Dimensions

Weight	550 g