Need help?Do you have a question about the Fluke 117C and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | 117C |
| Category | Multimeter |
| Language | English |
Alerts for hazardous voltage indication and proper test lead connection.
Explanation of symbols indicating safety information and product disposal.
Details the purpose of the meter's input and common terminals.
Lists and explains common error messages for troubleshooting.
Features for power saving, capturing Min/Max/Avg, and freezing readings.
Information on backlight usage and manual/autoranging modes.
Options to customize meter behavior during startup.
Instructions for proper test lead connection for accurate measurements.
Procedure for performing accurate resistance measurements.
How to use the continuity function for checks.
Procedures for measuring AC/DC voltage and millivolts.
Using the automatic voltage detection feature on model 117C.
How to measure the frequency of AC signals.
Non-contact AC voltage detection using VoltAlert on model 117C.
Procedure for testing diodes' forward and reverse bias.
Instructions for capacitance measurement in LoZ mode.
Understanding the analog bar graph for readings.
Method to check if the meter's fuse is functional.
Details on using different sensitivity levels for voltage detection.
How to enable the LoZ mode for capacitance testing.
Instructions for maintaining the meter by replacing battery and fuse.
Guidelines for cleaning the meter's body and terminals.
Detailed procedure for battery replacement.
Information on the correct fuse to use for replacement.
Procedure to open the meter's case for fuse replacement.
Advice on cleaning to prevent terminal contamination.
To Next Page
