Need help?Do you have a question about the Fluke 111 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity | Yes |
| Safety Rating | CAT III 600 V |
| DC Voltage | 0.1 mV to 600 V |
| AC Voltage | 0.1 mV to 600 V |
| DC Current | 0.1 µA to 10 A |
| AC Current | 0.1 µA to 10 A |
| Resistance | 0.1 Ω to 40 MΩ |
| Dimensions | 167 mm x 84 mm x 46 mm |
Essential safety guidelines to prevent shock, injury, and meter damage.
Information on how to reach Fluke for support or inquiries.
Explains the meaning of "Warning" and "Caution" statements in the manual.
How the meter indicates potentially hazardous voltage levels.
Meter notification for incorrect test lead placement.
Details on the automatic power-saving "Sleep Mode" feature.
Description and diagram of the meter's input terminals.
Overview of measurement functions corresponding to switch settings.
Explanation of symbols and readings shown on the meter's display.
How to capture and analyze minimum, maximum, and average readings.
How to freeze the current reading on the display.
Instructions for using and disabling the meter's backlight.
How to select measurement ranges manually or automatically.
Customizing meter behavior by holding buttons during power-on.
Procedure for measuring AC and DC voltages.
Explanation of how True RMS meters handle AC signals and low inputs.
Procedure for measuring electrical resistance.
Procedure for measuring capacitance values.
How to check for open circuits and shorts using the continuity function.
Procedure for testing the functionality of diodes.
Procedure for measuring AC and DC current (Models 111 & 112).
How to measure the frequency of AC or DC signals.
Explanation of the analog bar graph for dynamic readings.
Instructions for cleaning the meter's case and terminals.
Procedure for checking the meter's internal fuse.
Guidelines for safely replacing the battery and fuse.
To Next Page
