Fluke 1587 User Manual

ข้อมูลด้านเทคนิค
Fluke 1587/i400 Current Clamp FC Kit
คุณลักษณะสำคัญ
Includes the Fluke 1587 FC 2-in-1 Insulation DMM and the Fluke i400 Current Clamp
With the Fluke 1587 FC, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease
Use the Fluke i400 with your Fluke 1587 FC to accurately measure AC current without breaking the circuit
The Fluke 1587 FC 2-in1 Insulation DMM
Pl/DAR measurements with TrendIt™ graphs
Memory storage through Fluke Connect Measurements app
Temperature Compensation through Fluke Connect Measurements app
VFD low-pass filter for accurate motor drive measurements
Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
Insulation test voltages 500 V, 1000 V
Insulation test: 0.01 M? to 2.0 G?
Insulation test: 0.1 M? to 600 M?
Auto-discharge of capacitive voltage
Insulation test smoothing reading
Frequency / Capacitance / Diode test / Temperature
Min/Max / AC/DC Voltage / DC Millivolts / AC/DC Milliamps
Resistance (0.1 ? to 50 M?) / Continuity / Auto power off
Three-year warranty / Remote probe, test leads, alligator clips, K-type thermocouple, hard case
Fluke i400 AC Current Clamp

Fluke 1587 Specifications

General

Product type	Digital multimeter
Product color	Multicolor
Frequency range	0.0999 - 99.99 kHz
AC voltage range	60 - 1000 V
DC voltage range	6 - 1000 V
Measuring category	CAT IV 600V
Placement supported	Handheld multimeter
Resolution (DC voltage)	1 mV
Resolution (temperature)	0.1 °C
Temperature measurement range	-40 - 537 °C
Battery type	AA
Power source	Battery
Number of batteries supported	4
Operating altitude	0 - 2000 m
Maximum storage altitude	12000 m
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	0 - 95 %
Batteries included	Yes

Weight and Dimensions

Depth	203 mm
Width	100 mm
Height	50 mm
Weight	550 g