Need help?Do you have a question about the Fluke 179 and is the answer not in the manual?
General| Frequency range | 0 - 100 kHz |
|---|---|
| DC current range | 0.01 - 10 A |
| DC voltage range | 0.1 - 1000 V |
| Resistance range | 0.1 - 50000000 Ω |
| Capacitance range | 1 - 10000 nF |
| Resistance resolution | 0.1 Ω |
| Resolution (frequency) | 0.01 Hz |
| Resolution (DC current) | 0.01 µA |
| Resolution (DC voltage) | 0.1 mV |
| Resolution (temperature) | 0.1 °C |
| Basic accuracy (frequency) | ±(0.1% + 1) |
| Basic accuracy (DC voltage) | ±(0.09% + 2) |
| Basic accuracy (resistance) | ±(0.9% + 1) |
| Basic accuracy (capacitance) | ±(1.2% + 2) |
| Temperature measurement range | -40 - 400 °C |
| Storage temperature (T-T) | -30 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Manual | Yes |
Weight and Dimensions| Depth | 90 mm |
|---|---|
| Width | 43 mm |
| Height | 185 mm |
| Weight | 420 g |
Identifies conditions and procedures dangerous to the user or product.
Covers unsafe voltage and test lead alerts.
Identifies and explains icons and segments shown on the display.
Lists and explains error codes displayed by the product.
Details how to capture min, max, and average readings.
Describes how to freeze or automatically hold readings.
Steps for performing current measurements.
Safety warnings for product maintenance.
Guide for replacing the multimeter's battery.
Details accuracy and resolution for voltage measurements.
Provides specs for continuity and resistance measurements.
Specs for diode test, capacitance, AC/DC amps.
Details accuracy and resolution for frequency measurements.
Details overload protection and input impedance by function.
To Next Page
