Need help?Do you have a question about the Fluke 189 and is the answer not in the manual?
General| True RMS | Yes |
|---|---|
| DC Voltage Range | 0.1 mV to 1000 V |
| AC Voltage Range | 0.1 mV to 1000 V |
| Data Logging | Yes |
| Continuity | Yes |
| Diode Test | Yes |
| Safety Category | CAT III 1000 V, CAT IV 600 V |
| Basic DC Voltage Accuracy | ±0.025% |
| Basic AC Current Accuracy | ±1.0% |
| Basic Capacitance Accuracy | ±1.0% |
| Display Type | LCD |
| DC Current Range | 0.1μA to 10A |
| AC Current Range | 0.1μA to 10A |
| Temperature Range | -200 °C to 1350 °C |
| Basic DC Current Accuracy | 0.15 % |
| Basic Resistance Accuracy | 0.05 % |
| Basic Frequency Accuracy | 0.005 % |
| Basic Temperature Accuracy | 1 % |
Essential warnings and precautions for safe operation and to prevent equipment damage.
Detailed safety guidelines to prevent electric shock, injury, and equipment damage during use and maintenance.
Details on the multimeter's measurement accuracy, valid period, and conditions.
Fundamental specifications including voltage, current, resistance, capacitance, and frequency ranges.
Procedure to test the accuracy and functionality of the temperature measurement feature.
Detailed tests to verify the accuracy of all multimeter functions against specifications.
Standard step-by-step process for calibrating multimeter functions.
Procedures for using remote interfaces and performing temperature calibration.
The actual steps to perform temperature calibration and store constants.
To Next Page
