Need help?Do you have a question about the Fluke 177 and is the answer not in the manual?
General| Frequency range | 0.00001 - 100 kHz |
|---|---|
| DC current range | 0.00001 - 10 A |
| DC voltage range | 0.0001 - 1000 V |
| Resistance range | 0.1 - 50000000 Ω |
| Resistance resolution | 0.1 Ω |
| Resolution (frequency) | 0.01 Hz |
| Resolution (AC current) | 10 µA |
| Resolution (DC voltage) | 0.1 mV |
| Basic accuracy (frequency) | ±(0.1% + 1) |
| Basic accuracy (DC voltage) | ±(0.09% + 2) |
| Basic accuracy (resistance) | ±(0.9% + 1) |
| Basic accuracy (capacitance) | ±(1.2% + 2) |
| Battery type | 9V |
| Battery voltage | 9 V |
| Number of batteries supported | 1 |
| Manual | Yes |
Weight and Dimensions| Depth | 43 mm |
|---|---|
| Width | 90 mm |
| Height | 185 mm |
| Weight | 420 g |
Identifies conditions and procedures dangerous to the user.
Lists specific safety precautions related to product usage and environment.
Table listing symbols and their meanings for product identification.
Alerts users to potentially hazardous voltage conditions detected by the product.
Identifies and describes the different input terminals on the multimeter.
Details the functions of the various buttons on the multimeter.
Explains the different settings and functions selectable via the rotary switch.
Describes the elements and symbols shown on the multimeter's display.
Lists potential error messages and their explanations.
Explains the automatic power-saving feature and how to disable it.
Details how to capture minimum, maximum, and average readings.
Explains features for freezing readings on the display.
Describes how the multimeter selects or allows manual selection of measurement ranges.
Lists special functions activated during product startup.
Introduces the following pages that demonstrate fundamental measurement procedures.
Instructions for measuring AC and DC voltage levels.
Step-by-step guide for measuring electrical resistance.
Guide on how to measure electrical capacitance.
Procedure for checking electrical continuity and detecting beeps.
Instructions for testing the functionality of diodes.
How to measure temperature using the multimeter (model 179).
Steps for performing AC and DC current measurements.
Explains how True-rms meters handle zero input for AC measurements.
How to measure frequency for AC/DC voltage signals.
How to measure frequency for AC current signals.
Explains the function and use of the multimeter's bar graph display.
General guidelines and warnings for maintaining the product.
Instructions on how to clean the multimeter safely.
Procedure for checking and replacing the internal fuses.
Steps for replacing the battery and fuses, including warnings.
Details accuracy, voltage limits, display types, and operating conditions.
Specifies humidity, battery life, safety standards compliance.
Details compliance with EMC standards like CISPR and FCC.
Details electrical specifications for voltage and resistance measurements.
Details electrical specifications for current, frequency, and diode tests.
Provides temperature specifications and important notes for accuracy.
Details overload protection, input impedance, and rejection ratios.
Specifies the typical sensitivity for frequency measurements across ranges.
To Next Page
