®
PN 1600476 March 2001 Rev.2, 12/02
© 2001-2002 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
175, 177, & 179
True RMS Multimeters
Calibration Information
Introduction
WWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel
only.
The 175, 177, & 179 Calibration Information provides the information necessary to calibrate and verify
the performance of the Fluke Models 175, 177, and 179 True RMS Multimeters (hereafter known as the
Meter).
The following information is included in this document:
• Safety Information and International Electrical Symbols (page 2)
• Test Lead Alert (page 3)
• Specifications (pages 3-6)
• Testing and Replacing the Fuses (pages 6-7)
• Replacing the Battery (page 7-8)
• Cleaning (page 8)
• Replacing the LCD (page 9)
• Performance Tests (pages 10-13)
• Calibration (page 14-16)
• User-Replaceable Parts and Accessories (page 17-18)
• Warranty Statement (page 19)
See the 175, 177, & 179 Users Manual for complete operating instructions.
Service Information
To contact Fluke, call:
1-888-99-FLUKE (1-888-993-5853) in USA
1-800-36-FLUKE (1-800-363-5853) in Canada
+31 402-678-200 in Europe
+81-3-3434-0181 Japan
+65-276-6196 Singapore
+1-425-446-5500 in other countries
For additional information about Fluke, its products, and services, visit Fluke’s web site at:
www.fluke.com
To register this product, go to register.fluke.com
To Next Page
Need help?
General
Weight and Dimensions
