Fluke 177 User Manual

175, 177, 179
Users Manual
2
• Examine the case before you use the Product. Look
for cracks or missing plastic. Carefully look at the
insulation around the terminals.
• Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
• Do not work alone.
• Limit operation to the specified measurement
category, voltage, or amperage ratings.
• Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes)
to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• Use Product-approved measurement category (CAT),
voltage, and amperage rated accessories (probes,
test leads, and adapters) for all measurements.
• Do not exceed the Measurement Category (CAT)
rating of the lowest rated individual component of a
Product, probe, or accessory.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
• Keep fingers behind the finger guards on the probes.
• Use only current probes, test leads, and adapters
supplied with the Product.
• Connect the common test lead before the live test
lead and remove the live test lead before the
common test lead.
• Disable the Product if it is damaged.
• Do not use the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Only use probes, test leads, and accessories that
have the same measurement category, voltage, and
amperage ratings as the Product.
• Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures
above 50 °C. If the batteries are not removed, battery
leakage can damage the Product.

Fluke 177 Specifications

General

Frequency range	0.00001 - 100 kHz
DC current range	0.00001 - 10 A
DC voltage range	0.0001 - 1000 V
Resistance range	0.1 - 50000000 Ω
Resistance resolution	0.1 Ω
Resolution (frequency)	0.01 Hz
Resolution (AC current)	10 µA
Resolution (DC voltage)	0.1 mV
Basic accuracy (frequency)	±(0.1% + 1)
Basic accuracy (DC voltage)	±(0.09% + 2)
Basic accuracy (resistance)	±(0.9% + 1)
Basic accuracy (capacitance)	±(1.2% + 2)
Battery type	9V
Battery voltage	9 V
Number of batteries supported	1
Manual	Yes

Weight and Dimensions

Depth	43 mm
Width	90 mm
Height	185 mm
Weight	420 g