Fluke 116 Specifications

Technical Data
Fluke 116
HVAC Multimeter
with Temperature and Microamps
Features include:
•
Built in thermometer for HVAC applications
•
Microamps to test flame sensors
•
LoZ: helps prevent false readings due to ghost voltage
•
Large white LED backlight to work in poorly lit areas
•
Resistance, continuity, frequency and capacitance
•
Min/Max/Average with elapsed time to record signal
fluctuations
•
Compact ergonomic design for one-handed operation
•
Compatible with optional magnetic hanger (ToolPak™)
•
CAT III 600 V safety rated
Compact true-rms meter for
HVAC troubleshooting
The Fluke 116 was specifically designed
for the HVAC professional. It has every-
thing needed in an HVAC meter including
temperature and microamp measure-
ments to quickly troubleshoot problems
with HVAC equipment and flame sensors.
General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at
0 % to 95 %.
The accuracy specifications take the form of:
± ( [ % of reading ] + [ counts ] )
Maximum voltage between any
terminal and earth ground
600 V
Surge protection 6 kV peak per IEC 61010-1 600 V
CAT III, Pollution Degree 2
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Operating temperature -10 °C to + 50 °C
Storage temperature -40 °C to + 60 °C
Battery 9 volt Alkaline, NEDA 1604A/
IEC 6LR61
Battery life 400 hours typical, without backlight
N10140
R
Actual size

Fluke 116 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Product color	Black, Yellow
Measuring category	CAT III 600V
Placement supported	Handheld multimeter
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Battery type	9V
Power source	Battery
Battery technology	Alkaline
Number of batteries supported	1

Weight and Dimensions

Depth	46 mm
Width	84 mm
Height	167 mm
Weight	550 g