Multimeters
Safe Working Practices
3
• Use only current probes, test leads, and
adapters supplied with the Product.
• Connect the common test lead before
the live test lead and remove the live test
lead before the common test lead.
• Keep fingers behind the finger guards on
the probes.
• Only use probes, test leads, and
accessories that have the same
measurement category, voltage, and
amperage ratings as the Product.
• Remove all probes, test leads, and
accessories before the battery door is
opened.
• Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
To Next Page
Loading...
