Need help?Do you have a question about the Fluke 1654B and is the answer not in the manual?
General| Insulation Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
|---|---|
| RCD Test Current | 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1000 mA |
| Voltage Measurement | 0 V to 500 V AC/DC |
| RCD Trip Time Range | 0 ms to 2000 ms |
| Display | LCD |
| Power Supply | 6 x AA batteries |
| Dimensions | 100 mm x 250 mm x 125 mm |
| Safety Standards | IEC 61010-1 |
| Prospective Earth Fault Current (PEFC) | 0 A to 20 kA |
| Prospective Short Circuit Current (PSC) | 0 A to 20 kA |
Details safety warnings, cautions, and symbols for safe operation of the tester.
Defines accuracy specifications for various electrical measurements based on EN61557 standards.
Shows the maximum possible uncertainty for each function considering all influence factors.
Describes how to verify the accuracy of Volt and Insulation measurement functions.
Outlines the procedure to verify the accuracy of the LOOP Z, NO TRIP, L-PE function.
Details the procedure to verify the accuracy of the Loop Z, Hi Current function.
Explains how to test the RCD trip current accuracy.
Details the procedure to test the RCD Trip Time Accuracy.
To Next Page
