Fluke 1662 User Manual

Name: Fluke 1662
Brand: Fluke
Rating: 5 (1 reviews)

99 pages

To Next Page

Made available by www.instrotech.com

your test equipment provider

This document is made available for educational purposes only. Original issuer is the copyright owner.

Table of Contents4
Introduction10
How to Contact Fluke10
Safety11
Symbols13
Features and Accessories14
Standard Accessories15
Country-Specific Mains Cords16
Operation17
- Safety Features17
- Quick Start18
  - How to Use the Rotary Dial18
Rotary Dial19
- Push Buttons20
- Display22
- Input Terminals26
- Error Codes27
- Power-On Options29
- How to Zero the Test Leads31
- Safety Pretest for Insulation Resistance Measurements35
Measurements37
- Volts and Frequency Measurements37
- Insulation Resistance Measurements38
Insulation Resistance Display/Dial and Terminal Settings39
- Continuity Measurement41
Continuity Zero Display/Dial and Terminal Settings42
- Loop/Line Impedance Measurements43
  - Loop Impedance (Line to Protective Earth L-PE)43
Loop/Line Impedance/Dial and Terminal Settings44
- Loop Impedance (High-Current Trip Mode)46
- Loop Impedance in IT System Measurement48
- Line Impedance48
- Line Impedance Test Display Dial and Terminal Settings49
- RCD Tripping Time Measurements51
RCD Tripping Time Display/Dial and Terminal Settings53
- Custom RCD Setting - Var Mode55
- RCD Tripping Time in Auto Mode55
- RCD Tripping Current Measurements57
RCD Tripping Current/Dial and Terminal Settings58
- RCD Tests in IT Systems61
- Phase Rotation Tests63
- Earth Resistance Measurements64
Earth Resistance Display/Dial and Terminal Settings65
Applications66
- How to Test a Mains Socket and Ring Installation66
- Earth Resistance Test by Loop Method67
- Zmax68
- Auto Start69
- Loop Impedance Test with 10 Ma RCD69
- Auto Test Sequence (1664 FC)70
Auto Test Settings71
Memory Mode72
- Store a Measurement74
- Recall a Measurement74
- Clear Memory75
- Memory Error Message75
Download Test Results76
Fluke Connect Wireless System77
Maintenance78
- How to Test the Fuse79
- How to Test the Battery79
- Battery Replacement79
Specifications82
- General Specifications82
- Maximum Display Values84
- Electrical Measurement Specifications89
- Rcd Testing92
- Operating Ranges and Uncertainties Per en 6155797
- Operating Uncertainties Per en 6155798

Questions and Answers:

Need help?

Do you have a question about the Fluke 1662 and is the answer not in the manual?

Fluke 1662 Specifications

General

RCD Trip Time Measurement Range	0 ms to 2000 ms
Frequency Measurement	45 Hz to 65 Hz
Weight	1.3 kg
Phase Sequence Indicator	Yes
Battery Type	6 x AA batteries
Loop and Line Resistance	0.1 Ω to 2000 Ω
RCD Trip Current	10 mA, 30 mA, 100 mA, 300 mA, 500 mA
Dimensions	100 x 250 x 125 mm
Display	LCD
Operating Temperature	0 °C to 40 °C
Storage Temperature	-20°C to +60°C
Safety Standards	IEC 61010-1
Test Voltage	100 V, 250 V, 500 V, 1000 V