Electrical Installation Tester
Operation
17
Input Terminals
Table 8 shows the input terminals.
XW Warning
To prevent possible electrical shock, fire, or personal injury,
do not use test leads in CAT III or CAT IV environments
without the protective cap installed. The protective cap
decreases the exposed probe metal to <4 mm. This
decreases the possibility of arc flash from short circuits.
Table 8. Input Terminals
4
3
2
1
hwl021f.eps
Item Description
IR Port
L/L1/H (Line)
PE/L2/E (Protective Earth)
D
N/L3/S (Neutral)
The IR (infrared) port allows you to connect the Tester to a computer and
download the test data with a Fluke PC software product. With the
software, you can collect, organize, and display the test data in a format
that meets your needs. See Download Test Results for additional
information on using the IR port.
To Next Page
Loading...
