Receiver – Display
9 a) Display to indicate that the acoustic display is
switched off
9 b) Symbol to indicate the active LCD illumination
9 c) Information transmitted by the transmitter
(transmission code and battery charge conditi-
on)
9 d) Display to indicate that the automatic mode is
switched on
9 e) Bargraph display to indicate the signal intensity
9 f) Display for discharged battery
9 g) Manual mode: additional graphic display to indi-
cate the selected sensitivity Display of the sen-
sitivity within the selective mode.
Large magnifying glass => high sensitivity,
Small magnifying glass => low sensitivity
9 h) Display to indicate that the manual mode is
active
9 i) Display for mains voltage
9 j) Automatic mode; digital display for signal inten-
sity / manual mode, display of sensitivity/ SEL
for selecitve mode.
9 k) Transmission level transmitted by the transmit-
ter (LEVEL I, II, or III)
9 l) Display to indicate that the mains voltage detection is switched on
9 m) Display to indicate that the manual mode has been selected
To Next Page
Loading...
