Fluke 35040 - Page 52

35040
Operators Manual
3-28
Table 3-4. Available Display Lines
Display Line
Group Title
Appearance
(on a Measurement Display)
Blank Line
Air Density Setting ADCF = -.---
Temperature Pressure --.- C ---- hPa
Bias Setting Set: >+---.- V +---%
Firmware Revision FW Rev: 15OCT92 A
Time Interval Setting Interval: ---- s
IC Calibration Factor ICCF=1.234E+08 R/C
Optional Text 1 Optional Text Line 1
Configuration
Optional Text 2 Optional Text Line 2
Battery Voltage Batt: -.- V +-.—A
Leakage Current Leakage: -.--- pA
Bias Voltage IC Bias: ---.- V CEP
Charge --.--- nC
Current ---.- pA
Accumulated Charge --.--- nC ACCUM
Average Current ---.— pA AVG
Timed Charge --.--- nC ---- s
Amps, Coulombs, Volts
Predicted Timed Charge --.--- nC PREDICT
Leakage Rate Leak: -.--- R/s
Dose --.--- nR
Rate ---.- pR/s
Accumulated Dose --.--- nR ACCUM
Average Rate ---.- pR/min AVG
Timed Dose --.--- nR ---- s
Dose, Rate
Predicted Timed Dose --.--- nR PREDICT
Time Interval Setting Interval: ---- s
Timed Charge --.--- nC ---- s
Predicted Time Chrg --.--- nC PREDICT
Timed Dose --.--- nR ---- s
Predicted Timed Dose --.--- nR PREDICT
Time
Effective Exp. Time --.-- s