Need help?Do you have a question about the Fluke 353 and is the answer not in the manual?
General| DC voltage | 1000 V |
|---|---|
| Low pass filter | Yes |
| DC current (max) | 2000 A |
| Measuring category | CAT III 1000V, CAT IV 600V |
| AC current maximum resolution (probe) | 1 A |
| Battery type | AA |
| Number of batteries supported | 6 |
| Certification | IEC 61010-2-032, CE, RoHS, EMI, RFI, EMC, IP42 |
| Product color | Black, Red, Yellow |
| Operating altitude | 0 - 2000 m |
| Non-operating altitude | 0 - 10000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 52 mm |
|---|---|
| Width | 98 mm |
| Height | 300 mm |
| Weight | 814 g |
Guide on measuring AC and DC current using the clamp meter.
Procedure for capturing inrush current readings of electrical devices.
Instructions for measuring AC and DC voltage with the 355 model.
Steps to perform continuity tests on the 355 model.
Guide for measuring resistance using the 355 model.
Instructions on how to properly clean the clamp meter.
Steps for replacing the meter's batteries when voltage is low.
List of parts that can be replaced by the user.
Detailed electrical measurement specifications, including ranges and accuracy.
Specific voltage measurement parameters for the 355 model from 10 Hz to 100 Hz.
Specific voltage measurement parameters for the 355 model from 100.1 Hz to 1 kHz.
Resistance measurement specifications for the 355 model.
Specifications for the continuity beeper function on the 355 model.
Specifications for frequency measurement capabilities.
Overall specifications including batteries, weight, jaw size, and dimensions.
Details on design standards, compliance, and agency approvals.
Environmental operating conditions like temperature, humidity, and altitude.
To Next Page
