Fluke 353 User Manual

Clamp Meter
Specifications
17
Continuity Beeper (355)
On at ≤ 30 Ω
Off at ≥ 100 Ω
Frequency Measurement
Measurement Range 5.0 Hz to 1 kHz
Resolution
0.1 Hz (15 Hz to 399.9 Hz)
1 Hz ( 400 Hz to 1 kHz)
Accuracy
5.0 to 100 Hz
0.2 % + 2 counts
Accuracy
100.1 Hz to 1 kHz 0.5 % + 5 counts
Trigger Level Refer to current and
voltage tables
General Specifications
Batteries: 6- 1.5 V AA NEDA 15 A or IEC LR6
Test Leads: Rated to 1000 V
Weight: 1.8 lb (.814 kg)
Jaw Size: 2.28 inches (58 mm)
Dimensions (L x W x D): 12 inches x 3.75 inches x
2 inches (300 mm x 98 mm x 52 mm)
Safety Rating: IEC 61010-2-032, 600 V CAT IV,
1000 V CAT III

Fluke 353 Specifications

General

DC voltage	1000 V
Low pass filter	Yes
DC current (max)	2000 A
Measuring category	CAT III 1000V, CAT IV 600V
AC current maximum resolution (probe)	1 A
Battery type	AA
Number of batteries supported	6
Certification	IEC 61010-2-032, CE, RoHS, EMI, RFI, EMC, IP42
Product color	Black, Red, Yellow
Operating altitude	0 - 2000 m
Non-operating altitude	0 - 10000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	52 mm
Width	98 mm
Height	300 mm
Weight	814 g