Fluke 353 User Manual

353/355
Users Manual
4
Table 1. Explanation of Symbols
Symbol Explanation
W
Risk of danger. Important information. Refer to operation instructions.
X
Hazardous voltage
,
Application and removal from hazardous live conductors permitted
T
Double insulated
B
Battery
J
Earth Ground
B
Alternating Current
F
Direct Current
~
Do not dispose of this product as unsorted municipal waste. Go to Fluke’s web site for recycling information.
P
Conforms to requirements of European Union and European Free Trade
;
N10140
Conforms to relevant Australian standards
CAT III
Equipment is designed to protect against transients in equipment in fixed-equipment installations, such as
distribution panels, feeders and short branch circuits, and lighting systems in large buildings.
CAT IV
Equipment is designed to protect against transients from the primary supply level, such as an electricity
meter or an overhead or underground utility service.
)
Canadian Standards Association

Fluke 353 Specifications

General

DC voltage	1000 V
Low pass filter	Yes
DC current (max)	2000 A
Measuring category	CAT III 1000V, CAT IV 600V
AC current maximum resolution (probe)	1 A
Battery type	AA
Number of batteries supported	6
Certification	IEC 61010-2-032, CE, RoHS, EMI, RFI, EMC, IP42
Product color	Black, Red, Yellow
Operating altitude	0 - 2000 m
Non-operating altitude	0 - 10000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	52 mm
Width	98 mm
Height	300 mm
Weight	814 g