Clamp Meter
Safety Information
7
• Measure a known voltage first to make sure that the Product operates correctly.
• Only use probes, test leads, and accessories that have the same measurement
category, voltage, and amperage ratings as the Product.
• Use Product-approved measurement category (CAT), voltage, and amperage
rated accessories (probes, test leads, and adapters) for all measurements.
• Do not exceed the Measurement Category (CAT) rating of the lowest rated
individual component of a Product, probe, or accessory.
Caution
To avoid possible damage to the Meter or to equipment under test:
• Use the proper jacks, function, and range for the measurement application.
• Clean the case and accessories with a damp cloth and mild detergent only. Do
not use abrasives or solvents.
To Next Page
Loading...
