Fluke 369 User Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one
year from the date of purchase. This warranty does not cover fuses, disposable
batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service during the warranty
period, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99

Fluke 369 Specifications

General

Jaw Size	40 mm
Maximum Conductor Diameter	40 mm
Operating Altitude	2000 m
Storage Altitude	12000 m
Safety	IEC 61010-1, IEC 61010-2-032, IEC 61326-1
Jaw Opening	40 mm
Battery Type	2 x AA
Type	Leakage Current Clamp Meter
Current Range	0.1 mA to 60 A AC
Resolution	0.1 mA
Display	LCD
AC Current Range	0.1 mA to 60 A AC
AC Current Resolution	0.1 mA
Accuracy at 50/60 Hz	1 % + 5 digits
Crest Factor (50 Hz/60 Hz)	3
Storage Temperature	-20 °C to 60 °C
Operating Humidity	10 % to 90 % RH
Memory	No
Leakage Current Range	0.1 mA to 60 A AC
Voltage Range	Not applicable
Accuracy	1 % + 5 digits