572-2
Users Manual
18
Accessories
Optional accessories for the Product are:
• Soft Carrying Case (H6)
• Calibration Certification
• All K-type thermocouple probes with standard mini-connector. See Table 7 for
more information.
Recommended Temperature Probes
Warning
To prevent personal injury, see emissivity information for
actual temperatures. Reflective objects result in lower than
actual temperature measurements. These objects pose a
burn hazard.
See Table 6 for a list of recommended temperature probes.
Table 6. Recommended Temperature Probes
Probe Usage
80PK-1
The general purpose bead probe is for quick, accurate surface temperatures
and air temperatures within ducts, vent temperatures.
80PK-8
Pipe clamp probes (2) are essential for tracking continuously changing
temperature differentials on hydronic tubing and pipe loops, and good for
quick, accurate refrigerant temperatures.
80PK-9
The insulation-piercing probe provides a sharp tip to pierce pipe insulation
and flat probe tip for good surface thermal contact, air temperatures within
ducts, and vent temperatures.
80PK-11
Flexible cuff thermocouple temperature probe is a convenient way to attach a
thermocouple to a pipe while keeping hands free.
80PK-25
The piercing probe is the most versatile option. Good for checking air
temperature in ducts, surface temperature under carpets/pads, liquids,
thermometer wells, vent temperatures, and for penetrating pipe insulation.
80PK-26
The tapered probe is a good general-purpose gas and surface probe, with a
good length and low mass tip casing for faster reaction to surface and air
temperatures.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com
To Next Page
Loading...
