Fluke 65 Calibration Information

®
PN 1554518 January 2000 ©2000 Fluke Corporation. All rights reserved. Printed in U.S.A. 1
Model 65
Infrared Thermometer
Calibration Information
Introduction
This calibration information for the Fluke 65 Infrared Thermometer (also referred to as “the UUT”) provides
the following information:
• Safety information
• Specifications
• Basic maintenance
• Equipment required for performance tests and calibration
• Performance test procedures
• Calibration adjustment procedures
• List of replaceable parts
For complete operating instructions, refer to the Model 65 Infrared Thermometer Instruction Sheet.
Contacting Fluke
To locate an authorized service center, visit us on the World Wide Web at www.fluke.com. Or, call Fluke as
follows:
• USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-678-200
• Japan: +81-3-3434-0181
• Singapore: +65-738-5655
• Anywhere in the world: +1-425-446-5500

Fluke 65 Specifications

General

Brand	Fluke
Model	65
Category	Thermometer
Language	English