Fluke 8024B - 1.3. Specifications

8024B
OPERATOR CONVENIENCE:
3 1/2-digit liquid crystal display: A high contrast display that can be easily read
from across the room. No more worries about bent needles, parallax, etc.
Long term calibration stability: 2 years. Easy calibration - few adjustments.
Lightweight: .482 kg (17 ounces).
Safety Designed Test Leads: Finger guards on the probe and shrouded contacts on
connectors reduce the chance of accidental contact with circuit voltages.
POWER:
Up to 100 hours of continuous operation can be expected from a single,
inexpensive, 9-volt, alkaline battery (transistor radio/ calculator type).
Low battery voltage is automatically detected and displayed. The low battery
indication, BT, appears in the display when about 10 hours of operation remain.
Line operation is possible using a Model A8! Battery Eliminator. (See Section 6.)
ACCESSORIES:
1-3.
1-4.
A full line of accessories are available to extend the range and scope of your
instrument. They are listed in Table I-1 and described in detail in Section 6.
SPECIFICATIONS
Table 1-2 lists the specifications of your 8024B.
Table 1-1. 8024B Accessories
MODEL NO. DESCRIPTION
1-2
C90 Deluxe Carrying Case (Soft Vinyl)
Y8105 Rugged Carrying Case (Molded Plastic)
Y8102 Type K Sheathed Thermocouple
Y8103 Type K Beaded Wire Thermocouple
Y8104 Thermocouple Termination Kit
80T-150C Temperature Probe °C
80T-150F Temperature Probe °F
80K-6 High Voltage Probe
80K-40 High Voltage Probe
83RF High Frequency Probe
85RF High Frequency Probe