Need help?Do you have a question about the Fluke 80 V Series and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Voltage Measurement | 1000 V |
| Max Current Measurement | 10 A |
| DC Current Range | 0 μA to 10 A |
| AC Current Range | 0 μA to 10 A |
| Frequency Range | 0 Hz to 200 kHz |
| Safety Rating | CAT III 1000 V |
Information on how to contact Fluke for support or to locate a service center.
Safety warnings to avoid shock or injury when using the meter.
Cautions to avoid damage to the meter or equipment.
General operating and physical specifications for the digital multimeter.
Detailed accuracy and performance specifications for various functions.
Safety warnings to avoid shock or injury before performing maintenance on the meter.
Cautions regarding cleaning agents and methods for the meter.
Step-by-step instructions for opening the meter case safely.
Procedure for accessing the PCA and replacing the LCD screen.
Instructions for correctly reassembling the meter case after maintenance.
Safety warnings for battery and fuse replacement procedures.
Warnings to avoid shock or injury during performance tests.
Reference to testing fuses as described previously.
Procedure to test all segments of the meter's display.
How to view the meter's calibration adjustment counter.
Information about the password for calibration adjustment.
Steps to change the calibration adjustment password.
Procedure to restore the default calibration password.
Explains how meter buttons function during calibration.
Step-by-step guide for performing the calibration adjustment.
To Next Page
