Fluke 8024B - Page 13

8024B
Table 1-2. 8024B Specifications (cont)
AC VOLTS (Average Sensing, RMS Calibrated Sinewave):
RANGE |RESOLUTION BECEAAY
45 Hz to 1 kHz | 1 kHz to 2 KHz | 2 kHz to 5 kHz
200 mV 100 UV
+(0.75% +(1.5% of +(5% of
750V 1V +(1% of Not Not
reading +2 Specified Specified
digits)
Response Time............. Less than 2 seconds
Overload Protection ........ 750V rms or 1000V peak continuous, except
200 mV ac ranges (15 seconds maximum
above 300V rms).
Common Mode Rejection
Ratio (1 kQQunbalance) ..... >60 dB at 50 Hz and 60 Hz
Volt-Hz Product ............ 10’ max (200V at 50 kHz)
Input Impedance ........... 10 MQ in parallel with <C 100 pF
DC CURRENT
ACCURACY BURDEN
RANGE RESOLUTION
10UA 0.25V max
200 mA 100WLA
Response Time............. Less than 1 second
+(0.75% of
reading +1
digit)
Overload Protection ........ 2A/250V fuse in series with 3A/600V fuse.
1-4