Fluke 8024B - Page 15

8024B
Table 1-2. 8024B Specifications (cont)
CONDUCTANCE*
Equivalent Resistance
5MQ2 to 10,000 MQ
Accuracy +(2.0% of reading + 10 digits)
Resolution 0.05% of range (10°'°S)
Overload Protection 500V dc/rms ac (15 sec max above 300V dc
or rms ac)
Diode Test Will forward bias a typical PN junction
*Conductance is the inverse of ohms (1/{2) and is expressed in siemens (S).
A decrease in conductance is equivalent to an increase in resistance.
PEAK HOLD Use for Measuring Transient Signals
AC or DC, VOLTS or CURRENT
FUNCTIONS, RANGES ALL RANGES
AC
Accuracy 3% of reading + 10 digits, all ranges
(48 — 450 Hz) (except 2 mA, 6% of reading + 10 digits).
Average sensing, calibrated to read
highest rms value of sine wave.
Acquisition Time 150 ms**
DC
Accuracy 3% of reading + 10 digits, positive pulses
Acquisition Time 10 ms** square pulse
(3 ms square or 8 ms half sine typ.
Display Decay Rate <1 digit/sec
“Acquisition Time is the minimum duration of peak or surge for rated
accuracy.
Accuracy improves for longer peak duration.
TEMPERATURE (Thermocouple accessory required)
K-Type Thermocouple (Chromel-Alumel)
See accessories
Range -20° C to +1265° C
1-6
Temperature Sensor