Notwithstanding any
provision
of
any
agreement the
following warranty is
exclusive;
The JOHN
FLUKE MFG.
CO.,
INC., warrants each
instrument it manufactures
to be free from defects in material and
workmanship under
normal
use
and service for the
period
of
1-yearfromdateof
purchase.
This warranty extends only
to
the original purchaser. This warranty shall not apply to fuses,
disposable batteries {rechargeable
type
batteries are
warranted
for
90-days),
or
any
product or parts
which
have been subject to
misuse, neglect, accident, or
abnormal
conditions
of operations.
In
the event of failure of a product covered by this warranty,
John Fluke Mfg.
Co.,
Inc., will repair and calibrate an
instrument returned to
an authorized
Service
Facility
within
1
year
of
the
original
purchase;
provided
the
warrantor's
examination discloses to its satisfaction that the product
was defective.
The warrantor may, at its option, replace the
product
in lieu of repair. With regard
to
any instrument
returned within
1
year
of the original purchase, said
repairs
or
replacement will be made without
charge.
If
the
failure
has been
caused by misuse, neglect, accident, or
abnormal
conditions
of operations, repairs will be billed
at a nominal
cost.
In
such
case,
an
estimate
will
be
submitted before
work is
started,
if
requested.
THE FOREGOING WARRANTY
IS
IN
LIEU OF
ALL OTHER WARRANTIES,
EXPRESS
OR
IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY
OF MERCHANTABILITY, FITNESS,
OR
ADEQUACY FOR ANY
PARTICULAR
PURPOSE OR USE.
JOHN FLUKE MFG.
CO., INC., SHALL
NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, WHETHER IN
CONTRACT, TORT,
OR
OTHERWISE.
If any failure occurs, the
following
steps should be taken:
1. Notify the JOHN FLUKE MFG.
CO..
INC.,
or nearest
Service facility, giving full
details of
the difficulty,
and
include the model number,
type
number,
and
serial
number.
On receipt
of this
information, service
data,
or
shipping instructions will
be
forwarded
to you.
2. On receipt
of
the shipping instructions, forward the
instrument,
transportation prepaid. Repairs will be
made
at
the
Service Facility
and the instrument
returned, transportation
prepaid.
SHIPPING TO MANUFACTURER FOR REPAIR OR ADJUSTMENT
All shipments of
JOHN
FLUKE MFG.
CO.,
INC.,
instruments
should be made via
United Parcel Service or "Best Way”’
prepaid.
The instrument
should
be
shipped in
the
original
packing
carton;
or
if it
is not available, use any suitable
container that
is rigid
and of adequate size. If a substitute
container is
used, the instrument should be
wrapped
in paper
and
surrounded with at least four
inches of excelsior or similar
shock-absorbing
material.
CLAIM FOR DAMAGE IN SHIPMENT
TO ORIGINAL PURCHASER
The
instrument
should be
thoroughly
inspected immediately
upon original
delivery
to
purchaser. Alt
material
in
the
container should
be
checked against
the
enclosed
packing list. The
manufacturer
will not be responsible for shortages
against the packing sheet unless notified immediately. If the
instrument
is damaged in
any way,
a
claim
should
be
filed
with the carrier immediately. (To obtain a
quotation to repair shipment
damage,
contact
the nearest
Fluke Technical
Center.)
Final
claim and negotiations with
the
carrier
must be
completed
by the
customer.
The
JOHN
FLUKE MFG. CO,, INC, will be happy
to answer all
applications
or
use
questions,
which
will enhance your
use
of
this
instrument. Please
address your requests or
correspondence
to: JOHN FLUKE MFG.
CO.,
INC.,
P.O.
BOX
C9090,
EVERETT, WASHINGTON
98206,
ATTN:
Sales Dept.
For
European
Customers: Fluke (Holland) B.V.,
P.O. Box
5053,
5004
EB, Tilburg, The
Netherlands.
’For European customers.
Air Freight
prepaid.
John
FSuke Miq.
Co.,
8nc.,
P.O.
Box
C909O, Everett, Washington
98206
Rev. 6/81
To Next Page
Loading...
