Need help?Do you have a question about the Fluke 831 and is the answer not in the manual?
General| Model | Fluke 831 |
|---|---|
| Category | Laser Distance Meter |
| Storage Temperature | -20°C to 60°C |
| IP Rating | IP54 |
| Accuracy | ±1.5 mm |
| Laser Type | Class II, 635 nm, <1 mW |
| Display | LCD with backlight |
| Battery Type | 2 AAA batteries |
| Operating Temperature | 0 °C to 40 °C |
Learn how to navigate and utilize the on-board help features of the device.
Details on setting up the machine train and fixing it in place.
Understanding shaft centerline movement due to machinery temperature changes.
Standard alignment tolerances from the American National Standards Institute.
Procedure to align sensor and reflector for optimal laser beam detection.
Increasing measurement accuracy by averaging multiple readings.
Default mode for horizontal coupled machines, taking points in sectors.
Understanding the quality factor and color codes for measurement accuracy.
Diagram showing points out of track due to alignment condition.
Choosing how alignment results are displayed (Actual, Specification, Actual-Spec).
Saving dimensions, measurements, and settings for analysis and future use.
Creating PDF reports of asset measurements directly on the device.
Procedures for identifying and fixing soft foot issues.
Configuring sensor, reflector, and machine dimensions for vertical alignment.
Applying Static Clock mode for vertical machine alignment.
Adjusting angular misalignment using shims.
Updating the sensor's firmware via the rugged touch device.
Guidelines for correctly mounting the sensor and reflector.
Steps for establishing sensor communication.
Instructions for updating the device's firmware.
To Next Page
