Fluke 831 - Dimensions; Train setup and fixation; Machine properties; Thermal growth

Mount reflector 29
Dimensions 32
Train setup and fixation 33
Machine properties 35
Toggle 35
Machine color 35
Thermal growth 36
Thermal growth calculator 37
Multiple feet 39
Coupling properties 41
Targets 41
Tolerances 43
Available tolerance tables 43
ANSI standard specification tolerances 44
User defined tolerances 44
Asymmetric and symmetric tolerances 45
Tolerance table based on coupling format 45
Suggested consolidated shaft alignment tolerances 46
Laser beam adjustment (sensALIGN 3) 49
Adjust sensor and reflector until the laser beam status LED blinks green 49
Laser beam adjustment 51
Laser adjustment wizard 51
XYView 53
Initialize sensor 55
Measurement 56
Averaging 56
Measurement modes 58
Active Clock measurement 59
Taking measurement points automatically 61
Edition: 10.2022 4
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com