Multiple feet
The item "Multiple feet" is primarily used to determine foot corrections in a multiple feet
machine, and is therefore accessible also in the result screen.
The dimension between the feet may be defined in the 'Multiple feet' screen which is accessed
by tapping the item "Multiple feet".
If already entered, the 'Multiple feet' screen will show the dimension between the front feet
and the back feet [1].
Note
The intermediate machine feet are not displayed in the dimension screen.
Tap to add any intermediate feet.
Fluke 831 39
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
