Laser beam adjustment
Laser adjustment wizard
The laser adjustment wizard is the primary laser beam adjustment feature in the touch device.
If the sensor is initialized, and the laser beam is not centered, use the wizard to adjust the
laser beam correctly. The wizard arrows indicate the direction and amount in which movement
should take place.
l
The wizard arrows next to the vertical position adjustment thumbwheel (1) and the hori-
zontal adjustment knob (2) indicate the direction and magnitude in which the thumb-
wheel or the knob is to be moved in order to adjust the laser beam correctly.
l
The attained laser beam status is shown in 3.
l
4 shows the position of the laser beam on the position detector.
l
The wizard arrows decrease in magnitude and occurrence as the laser beam status
Fluke
831 51
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
