Fluke 831 - Rfid; Assign a Saved Asset to an RFID Tag

RFID
The rugged device uses this automatic identification technology to do these:
l
Identify assets to be aligned
l
Enter related assets directly into the device
l
Store data and results under the correct asset automatically
Assign a saved asset to an RFIDtag
From the home screen, tap
the "Asset park" icon to show assets saved.
Tap the asset [1] that is to be assigned to the RFIDtag, then tap the RFID icon [2].
Position the rugged device such that its built-in NFCantenna is as close to the RFID tag as pos-
sible (less than a centimeter).
l
(1) Near Field Communication (NFC) antenna symbol
As soon as data has been written on the RFIDtag, the related hint is shown.
24 Version:
1.0
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com